Highly Corrosion-Resistant Design

Liquid wet ends are made of PVC, silicon carbide and fluorine resin, all of which are resistant to most acids and alkalis. The pump uses no seals, which eliminates the risk of leaks.

Close coupled to its motor, eliminating the need for intermediate coupling and making the assembly both lightweight and compact. Space-saving design makes it suitable for built-in pump systems.

Without the pulsation that is common to the reciprocating pump and the gear pump for general uses, liquid is transferred quietly and smoothly , not agitating or generating foam/bubbles.

Magnetic drive seal-less pumps are free from leakage problems and the need for seal replacement.

By simply combining a PFC controller, magnetic flowmeter, inverter, and back pressure valve, it is possible to inject a constant flow with less pulsation even if there are fluctuations in the level of the suction tank or load fluctuations on the discharge side.

Regardless of the temperature change, viscous liquid can be handled at accurate flow rate, which cannot do with other pumps. As the output is linearly related to rpm, the flow rate is easily controlled by changing motor speed. The pump achieves fixed injection with the rangeability 10 times greater than conventional metering pumps.

• Rangeability 1:100
• To perform constant flow Injection, use this pump with a PFC controller, magnetic flowmeter, inverter and back pressure valve.

Examples of applications

• Automatic injection of coagulant at a constant mixing ratio of coagulant in low flow/high head chemical lines.
• Quantitative transfer of paper-making dye.
• Transfer of sodium hypochlorite.
• Pulsation-free metering, injection and transfer of chemical solutions.
• Transfer of various acids, alkalis and chemical solutions.